Home › ENGINE ยท 2TR-FE › EMISSION CONTROL › AIR FUEL RATIO SENSOR

AIR FUEL RATIO SENSOR > REMOVAL

for Preparation Click here



1. REMOVE ENGINE UNDER COVER NO.2 (w/ Engine Under Cover No.2)
  1. Remove the engine under cover No.2 together with the engine side under cover LH and engine side under cover RH (for Wide Body).



2. REMOVE AIR FUEL RATIO SENSOR
  1. Disconnect the air fuel ratio sensor connector.



    A102377E01
  1. Using SST, remove the air fuel ratio sensor from the exhaust pipe assembly front.

    SST
    09224-00010