OIL FILTER > REMOVAL |
| 1. DRAIN ENGINE OIL |
Remove the oil filler cap.
Remove the oil drain plug and drain the engine oil from the oil pan.
Clean the oil pan drain plug and install it with a new gasket.
| 2. REMOVE ENGINE UNDER COVER NO.2 (for Narrow Body, w/ Engine Under Cover No.2) |
| 3. REMOVE ENGINE SIDE UNDER COVER RH (for Wide Body, w/ Engine Side Under Cover RH) |
| 4. REMOVE OIL FILTER SUB-ASSEMBLY |
![]() |
Using SST, remove the oil filter.