Home › ENGINE ยท 2KD-FTV › COOLING › THERMOSTAT

THERMOSTAT > INSPECTION

for Preparation Click here



1. THERMOSTAT


B009317

HINT:
The valve opening temperature is provided on the thermostat.



    P011706
  1. Immerse the thermostat in water and gradually heat the water.

  1. Check the valve opening temperature.

    Valve opening temperature:
    80 to 84 °C (176 to 183 °F)

    HINT:
    If the valve opening temperature is not as specified, replace the thermostat.



    A112806E01
  1. Check the valve lift.

    Valve lift:
    10 mm (0.394 in.) or more at 95 °C (203 °F)

    HINT:
    If the valve lift is not as specified, replace the thermostat.

  1. Check that the valve is fully closed when the thermostat is at low temperatures (below 40 °C (104 °F)).

    HINT:
    If not closed, replace the thermostat.