Home › BODY ELECTRICAL › AUDIO / VISUAL › AUDIO AND VISUAL SYSTEM

AUDIO AND VISUAL SYSTEM > CD Sound Skips

for Preparation Click here


INSPECTION PROCEDURE

1.CHECK CD
I100151
  1. Check the CD.

    OK:
    The CD is clean.

    HINT:
    If dirt is on the CD surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.

    NOTICE:
    Do not use a conventional record cleaner or anti-static preservative.



NG
CLEAN CD
OK


2.CHECK CD
I100152
  1. Check that the CD is not deformed or cracked.

    OK:
    No deformations or cracks appear on the CD.



NG
CD IS FAULTY
OK


3.CHECK OPERATION USING ANOTHER CD
  1. Check using another CD.

    1. Check if the problem reoccurs using another CD.

      OK:
      The problem does not occur.



OK
CD IS FAULTY
NG


4.CHECK RADIO RECEIVER
  1. Check the radio receiver installation condition.

    1. Check that the radio receiver is properly installed.

      OK:
      Radio receiver is properly installed.



NG
REINSTALL RADIO RECEIVER PROPERLY
OK

RETURN TO THE ORIGINAL INSPECTION FLOW BECAUSE THE CHECK RESULT IS NORMAL