Home › BRAKE › PARKING BRAKE › PARKING BRAKE CABLE

PARKING BRAKE CABLE > REMOVAL

for Preparation Click here



1. REMOVE REAR WHEEL


2. REMOVE REAR BRAKE DRUM


    C102597E01
  1. Release the parking brake lever, and remove the brake drum.

    HINT:
    If the brake drum cannot be removed easily, perform the following steps.

  1. Remove the hole plug and insert a screwdriver through the hole in the backing plate, and hold the automatic adjusting lever away from the adjuster.

  1. Using another screwdriver, contract the brake shoe adjuster by turning the adjusting wheel.



3. REMOVE REAR AXLE BRAKE DRUM GASKET


4. REMOVE AUTOMATIC ADJUST LEVER


    C102605
  1. Remove the automatic adjust lever and the tension spring.



5. SEPARATE PARKING BRAKE SHOE STRUT SET


    C102599E01
  1. Using SST, remove the upper side tension spring from the brake shoe.

    SST
    09703-30011  



6. REMOVE FRONT BRAKE SHOE


    C102600
  1. Using a needle-nose pliers, remove the anchor side tension spring.



    C102601E01
  1. Using SST, remove the cup, shoe hold-down sprig and pin.

    SST
    09718-00010  



    C102667
  1. Remove the parking brake shoe lower strut.

  1. Separate the brake shoe return spring, and remove the front brake shoe.



7. REMOVE REAR BRAKE SHOE


    C102603E01
  1. Using SST, remove the cup, shoe hold-down sprig and pin.

    SST
    09718-00010  



    C102606
  1. Disconnect the parking brake cable No.3 and remove the rear brake shoe.



8. REMOVE PARKING BRAKE CABLE ASSEMBLY NO.3 (NARROW BODY)


    C102159
  1. Remove the 2 bolts and separate the parking brake cable assembly No.3 from the backing plate.



  1. Remove the 5 bolts, nut and parking brake cable assembly No.3.


    C102158

  1. Remove the parking brake cable assembly No.3 from the parking brake equalizer.



9. REMOVE PARKING BRAKE CABLE ASSEMBLY NO.3 (WIDE BODY)


    C102159
  1. Remove the 2 bolts and separate the parking brake cable assembly No.3 from the backing plate.



  1. Remove the 6 bolts, nut and parking brake cable assembly No.3.


    C105462

  1. Remove the parking brake cable assembly No.3 from the parking brake equalizer.