Home › RESTRAINTS › SUPPLEMENTAL RESTRAINT SYSTEM › FRONT PASSENGER AIRBAG ASSEMBLY

FRONT PASSENGER AIRBAG ASSEMBLY > ON-VEHICLE INSPECTION

for Preparation Click here



1. INSPECT FRONT PASSENGER AIRBAG ASSEMBLY (VEHICLE NOT INVOLVED IN COLLISION)
  1. Perform a diagnostic system check. (Click here)



    C113663
  1. With the front passenger airbag installed on the vehicle, perform a visual check. If there are any defects mentioned below, replace the instrument panel with a new one:

    1. Cuts, minute cracks or marked discoloration on the instrument panel around the front passenger airbag.



2. INSPECT FRONT PASSENGER AIRBAG ASSEMBLY (VEHICLE INVOLVED IN COLLISION AND AIRBAG NOT DEPLOYED)
  1. Perform a diagnostic system check. (Click here)



    C113664
  1. With the front passenger airbag removed from the vehicle, perform a visual check. If there are any defects below, replace the front passenger airbag, instrument panel or instrument panel reinforcement with a new one:

    1. Cuts, minute cracks or marked discoloration on the front passenger airbag.
    2. Cracks or other damage to the connector.
    3. Deformation or cracks on the instrument panel or instrument panel reinforcement.