Home › BRAKE › BRAKE › BRAKE MASTER CYLINDER

BRAKE MASTER CYLINDER > REMOVAL

for Preparation Click here



1. DRAIN BRAKE FLUID


2. REMOVE BRAKE MASTER CYLINDER


    C106096E01
  1. Using SST, disconnect the 2 brake tubes from the master cylinder.

    SST
    09023-00101  

  1. Disconnect the warning switch connector.



  1. Manual Transmission:



      C112532
    1. Slide the clip and separate the clutch reservoir tube.



    C106097
  1. Remove the 2 nuts, and disconnect the bracket.

  1. Remove the brake master cylinder from brake booster.



3. REMOVE BRAKE MASTER LESS RESERVOIR TANK CYLINDER SUB-ASSEMBLY
  1. Remove the retainer, master cylinder reservoir tank and the 2 grommets from brake master cylinder.