2KD-FTV VACUUM PUMP > INSPECTION |
| 1. INSPECT VACUUM PUMP BLADE A |
![]() |
Using a micrometer, measure the thickness of the vacuum pump blades A.
| 2. INSPECT CHECK VALVE ASSEMBLY |
![]() |
Check that air flows from the hose side to the pump side.
Check that air does not flow from the pump side to the hose side.
If necessary, replace the check valve assembly.
| 3. INSPECT VACUUM PUMP HOUSING |
![]() |
Inspect the inside surface of the housing for scoring.
If necessary, replace the vacuum pump assembly.