Home › BRAKE › BRAKE › 2KD-FTV VACUUM PUMP

2KD-FTV VACUUM PUMP > REMOVAL

for Preparation Click here



1. REMOVE ENGINE UNDER COVER NO.1


2. REMOVE ENGINE UNDER COVER SUB-ASSEMBLY NO.2


3. REMOVE VACUUM PUMP ASSEMBLY


    C102554
  1. Slide the clip and disconnect the 2 vacuum hoses from the vacuum pump.

  1. Remove the union bolt, vacuum pump union and 2 gaskets.



    C102555
  1. Remove the 2 nuts and pull out the vacuum pump from the engine.

  1. Remove the 2 O-rings.