Home › HEATER & AIR CONDITIONING SYSTEM › AIR CONDITIONING › 5L-E COMPRESSOR AND MAGNETIC CLUTCH

5L-E COMPRESSOR AND MAGNETIC CLUTCH > ON-VEHICLE INSPECTION

for Preparation Click here



1. INSPECT W/PULLEY COMPRESSOR ASSEMBLY


    I033658E01
  1. Disconnect the connector from the w/ pulley compressor assembly.

  1. Connect the positive (+) lead from the battery to terminal 1 and the negative (-) lead to the body ground.

  1. Check that the magnetic clutch energized.

    OK:
    The magnetic clutch energized.

    If the resistance value is not as specified, replace the magnetic clutch assembly.