Home › HEATER & AIR CONDITIONING SYSTEM › AIR CONDITIONING › 2TR-FE COMPRESSOR AND PULLEY

2TR-FE COMPRESSOR AND PULLEY > ON-VEHICLE INSPECTION

for Preparation Click here



1. INSPECT W/PULLEY COMPRESSOR ASSEMBLY


  1. Check the operation.


    E104257E01


    1. Start the engine.

    2. Inspect the weight hub.

      Standard:
      The weight hub rotates along with the pulley.



    E061224E02
  1. Measure the resistance between terminals 1 and 2.

    Standard resistance:
    10 to 11 Ω at 25°C (77°F)

    If the resistance is not as specified, replace the w/pulley compressor assembly.