Home › SUSPENSION & AXLE › SUSPENSION › FRONT SUSPENSION UPPER ARM

FRONT SUSPENSION UPPER ARM > DISASSEMBLY

for Preparation Click here



1. REMOVE FRONT SUSPENSION UPPER ARM BUSHING


    C103222
  1. Use a hammer and chisel to unstake the lock nut.

  1. Remove the lock nut and retainer.



    G020164
  1. Use a hammer and chisel to diagonally bend 2 parts of the front suspension upper arm bushing flange.



    C113867E01
  1. Using SST and a press, remove the front suspension upper arm bushing (front side) from the front suspension upper arm.

    SST
    09950-00020  
    09527-20011  
    09649-17010  
    09710-22021   (09710-01061)

  1. Remove the lock nut (rear side), retainer and front suspension arm shaft from the front suspension upper arm.



    C102002E01
  1. Using SST and a press, remove the front suspension upper arm bushing (rear side) from the front suspension upper arm.

    SST
    09950-00020  
    09710-26011   (09710-05031)
    09950-60010   (09951-07360)