Home › SUSPENSION & AXLE › SUSPENSION › FRONT SUSPENSION UPPER ARM

FRONT SUSPENSION UPPER ARM > REASSEMBLY

for Preparation Click here



1. INSTALL FRONT SUSPENSION UPPER ARM BUSHING


    C102004E01
  1. Using SST and a press, press a new front suspension bushing (rear side) into the front suspension upper arm.

    SST
    09649-17010  
    09316-20011  

  1. Install the front suspension upper arm shaft to the front suspension upper arm.



    C113868E01
  1. Using SST and a press, press a new front suspension bushing (front side) into the front suspension upper arm.

    SST
    09527-21011  
    09726-27012   (09726-02101)
    09710-26011   (09710-05061)



    C102006E01
  1. Install the 2 retainers and 2 new lock nuts.

    HINT:
    Install the front suspension upper arm shaft as shown in the illustration.

    Torque:
    225 N*m{ 2,290 kgf*cm , 160 ft.*lbf }



    C103223
  1. Using a hammer and chisel, stake the 2 lock nuts.