Home › SUSPENSION & AXLE › SUSPENSION › FRONT SUSPENSION LOWER ARM

FRONT SUSPENSION LOWER ARM > REMOVAL

for Preparation Click here



1. REMOVE FRONT WHEEL


2. SEPARATE FRONT STABILIZER LINK ASSEMBLY


    C102008E03
  1. Hold the front stabilizer link assembly with a wrench and remove the nut.

  1. Remove the retainer and cushion.

  1. Remove the front stabilizer link assembly from front suspension lower arm.

  1. Remove the 2 retainers and cushion.



3. SEPARATE FRONT SHOCK ABSORBER


    C102009E02
  1. Remove the bolt and separate the front shock absorber from the front suspension lower arm.



4. REMOVE FRONT STRUT BAR


    C102010E02
  1. Remove the nut of the strut bar (rear side), washer, strut bar retainer, strut bar cushion and tube.



    C102011E01
  1. Remove the 2 bolts and 2 nuts and separate the strut bar from the front suspension lower arm.



5. REMOVE FRONT SUSPENSION LOWER ARM


    C102012E01
  1. Remove the 2 bolts and 2 nuts from the front lower ball joint.



    C102013E02
  1. Put matchmarks on front suspension No.1 camber adjust cam, front suspension No.2 camber adjust cam and suspension member.

  1. Remove the nut and the following parts.

    1. Washer

    2. Front suspension No.2 camber adjust cam

    3. Front suspension No.1 camber adjust cam

    4. Front suspension lower arm