Home › SUSPENSION & AXLE › SUSPENSION › FRONT STABILIZER BAR

FRONT STABILIZER BAR > REMOVAL

for Preparation Click here



1. REMOVE FRONT STABILIZER LINK ASSEMBLY LH


    C102063E01
  1. Remove the nut and front stabilizer link assembly LH from the front stabilizer bar.

    HINT:
    If the stud bolt rotates with the nut, use a hexagon wrench (6 mm) to hold the stud bolt.



    C102064E01
  1. Hold the front stabilizer link assembly LH with a wrench and remove the nut.

  1. Remove the retainer and cushion.

  1. Remove the front stabilizer link assembly LH from front suspension lower arm.

  1. Remove the 2 retainers and cushion.



2. REMOVE FRONT STABILIZER LINK ASSEMBLY RH

HINT:
Use the same procedures for the LH side.



3. REMOVE FRONT NO.2 STABILIZER BRACKET LH


    C102065E01
  1. Remove the 2 bolts and front No.2 stabilizer bracket.



4. REMOVE FRONT NO.2 STABILIZER BRACKET RH

HINT:
Use the same procedures for the RH side and LH side.



5. REMOVE FRONT NO.1 STABILIZER BAR BUSHING
  1. Remove the 2 front No.1 stabilizer bar bushings from the front stabilizer bar.



6. REMOVE FRONT STABILIZER BAR
  1. Remove the front stabilizer bar from the vehicle.



7. REMOVE FRONT NO.1 STABILIZER BRACKET


    C102066E01
  1. Remove the 5 bolts and front No.1 stabilizer bracket (LH side).

  1. Remove the 5 bolts and front No.1 stabilizer bracket (RH side).