Home › BODY ELECTRICAL › PARK ASSIST / MONITORING › NO. 1 ULTRASONIC SENSOR

NO. 1 ULTRASONIC SENSOR > REMOVAL



1. REMOVE STEP PLATE COVER LH (FRONT POSITION)


    B101612E01
  1. Remove the 4 clips.

  1. Release the claw and remove the step plate cover.



2. REMOVE STEP PLATE COVER RH (FRONT POSITION)


3. REMOVE RADIATOR GRILLE (FRONT POSITION)


    B101611E01
  1. Remove the 2 clips and 2 screws.

  1. Release the 6 claws and 4 clips and remove the radiator grille.



4. REMOVE FRONT BUMPER COVER (FRONT POSITION)


    E109046E01
  1. Remove the 8 clips and 3 bolts.

  1. Release the 12 claws and remove the bumper.

  1. Disconnect the connectors. (w/ fog light)



5. REMOVE REAR BUMPER COVER (REAR POSITION)


6. REMOVE ULTRASONIC SENSOR RETAINER NO.1
  1. Disconnect the connector.



    E075062
  1. Remove the ultrasonic sensor retainer No.1 as shown in the illustration.



7. REMOVE NO. 1 ULTRASONIC SENSOR
  1. Remove the No.1 ultrasonic sensor.