Home › BODY ELECTRICAL › PARK ASSIST / MONITORING › NO. 2 ULTRASONIC SENSOR

NO. 2 ULTRASONIC SENSOR > REMOVAL



1. REMOVE REAR BUMPER COVER


    E109048E01
  1. Release the 4 claws and remove the 2 rear bumper covers.



    B102482
  1. Remove the 6 clips.

  1. Remove the 6 screws and rear bumper.



2. REMOVE ULTRASONIC SENSOR RETAINER NO.1
  1. Disconnect the connector.



    E075062
  1. Remove the ultrasonic sensor retainer No.1 as shown in the illustration.



3. REMOVE NO. 2 ULTRASONIC SENSOR
  1. Remove the No.2 ultrasonic sensor.