Home › BODY ELECTRICAL › HORN › LOW PITCHED HORN

LOW PITCHED HORN > REMOVAL

for Preparation Click here



1. DISCONNECT BATTERY NEGATIVE CABLE
(Click here)


2. REMOVE RADIATOR GRILLE


    B101611E01
  1. Remove the 2 clips and 2 screws.

  1. Release the 6 claws and 4 clips and remove the radiator grille.



3. REMOVE STEP PLATE COVER RH


    B101612E01
  1. Remove the 4 clips.

  1. Release the claw and remove the step plate cover.



4. REMOVE STEP PLATE COVER LH


5. REMOVE FRONT BUMPER


    E109046E01
  1. Remove the 8 clips and 3 bolts.

  1. Release the 12 claws and remove the bumper.

  1. Disconnect the connectors. (w/ fog light)



6. REMOVE LOW PITCHED HORN ASSEMBLY


    E103999
  1. Disconnect the connector.

  1. Remove the bolt and the low pitched horn assembly.