REAR QUARTER WINDOW GLASS > REMOVAL |
| 1. REMOVE FRONT SEAT OUTER BELT ASSEMBLY LH |
![]() |
Remove the bolt and disconnect front seat outer belt assembly RH.
![]() |
Using a screwdriver, disengage the 2 claws and cover.
![]() |
Remove the bolt and disconnect front seat outer belt assembly RH.
| 2. REMOVE BACK DOOR SCUFF PLATE |
![]() |
Using a screwdriver, disengage the 7 clips and 4 claws and remove the back door scuff plate.
| 3. REMOVE BACK DOOR WEATHERSTRIP |
| 4. REMOVE QUARTER TRIM PANEL ASSEMBLY REAR LH |
![]() |
Using a screwdriver, disengage the 35 clips and remove the quarter trim panel assembly rear LH.
| 5. REMOVE QUARTER PILLAR GARNISH LH |
![]() |
Release the 6 clips and remove the quarter pillar garnish LH.
| 6. REMOVE ROOF SIDE GARNISH INNER UPPER LH |
![]() |
Using a screwdriver, disengage the 6 clips and remove the roof side garnish inner upper LH.
| 7. REMOVE REAR QUARTER WINDOW GLASS |
![]() |
Apply protective tape to the outer surface of the vehicle body to prevent scratches.
From the interior, insert piano wires between the vehicle body and back door glass as shown in the illustration.
Tie objects that can serve as handles (for example, wooden blocks) to all wire ends.
Cut through the adhesive by pulling the piano wire around the rear quarter window glass.
Using a suction cup, remove the rear quarter window glass.