Home › BODY ELECTRICAL › LIGHTING › HEADLIGHT ASSEMBLY

HEADLIGHT ASSEMBLY > REMOVAL

for Preparation Click here



1. REMOVE RADIATOR GRILLE


    B101611E01
  1. Remove the 2 clips and 2 screws.

  1. Release the 6 claws and 4 clips and remove the radiator grille.



2. REMOVE STEP PLATE COVER LH (Body Type Wide)


    B101612E01
  1. Remove the 4 clips.

  1. Release the claw and remove the step plate cover.



3. REMOVE STEP PLATE COVER RH (Body Type Wide)


4. REMOVE FRONT BUMPER ASSEMBLY (Body Type Wide)


    E109046E01
  1. Remove the 8 clips and 3 bolts.

  1. Release the 12 claws and remove the bumper.

  1. Disconnect the connectors. (w/ fog light)



5. REMOVE FRONT BUMPER SIDE SUPPORT (Body Type Wide)


    E109047E01
  1. Remove the 2 screws.

  1. Release the 2 clamps and remove the front bumper side support.



6. REMOVE HEADLIGHT ASSEMBLY (Body Type Narrow)


    E104420E01
  1. Attach protective tape to the position shown in the illustration.

  1. Remove the 2 screws and disengage the pin.

  1. Pull in the direction indicated by the arrow, disengage the 2 claws and separate the headlight assembly.

  1. Disconnect each connector and remove the headlight assembly.



7. REMOVE HEADLIGHT ASSEMBLY (Body Type Wide)


    E108095E01
  1. Remove the 2 screws and disengage the pin.

  1. Pull in the direction indicated by the arrow, disengage the 2 claws and separate the headlight assembly.

  1. Disconnect each connector and remove the headlight assembly.