Home › BODY ELECTRICAL › LIGHTING › HEADLIGHT ASSEMBLY

HEADLIGHT ASSEMBLY > DISASSEMBLY

for Preparation Click here



1. REMOVE NO.1 HEADLIGHT COVER


    E103112
  1. Remove the No.1 headlight cover.



2. REMOVE NO.1 HEADLIGHT BULB


    E103113E01
  1. Release the set spring lock <a> as shown in the illustration and remove the No.1 headlight bulb.



3. REMOVE FRONT TURN SIGNAL LIGHT BULB


    E103114
  1. Turn in the direction indicated by the arrow and remove the front turn signal light socket and the front turn signal light bulb as a unit.



4. REMOVE FRONT TURN SIGNAL LIGHT SOCKET
  1. Remove the front turn signal light bulb from the front turn signal light socket.



5. REMOVE CLEARANCE LIGHT BULB


    E103115
  1. Turn in the direction indicated by the arrow and remove the clearance light socket and the clearance light bulb as a unit.



6. REMOVE CLEARANCE LIGHT SOCKET
  1. Remove the clearance light bulb from the clearance light socket.



7. REMOVE HEADLIGHT LEVELING MOTOR (w/ Leveling Motor)


    E108088E01
  1. Turn the headlight leveling motor as shown in the illustration and disengage the pin.

  1. Turn the headlight leveling motor to align the recessed parts with the headlight unit.



    E108089E01
  1. Turn the aiming screw as shown in the illustration to remove the headlight leveling motor.