Home › BODY ELECTRICAL › LIGHTING › REAR COMBINATION LIGHT ASSEMBLY

REAR COMBINATION LIGHT ASSEMBLY > DISASSEMBLY

for Preparation Click here



1. REMOVE REAR COMBINATION LIGHT BULB


    E112360
  1. Turn in the direction indicated by the arrow, and remove the rear combination light socket and wire sub-assembly and the 3 rear combination light bulbs as a unit.



2. REMOVE REAR COMBINATION LIGHT SOCKET AND WIRE SUB-ASSEMBLY
  1. Remove the 3 rear combination light bulbs from the rear combination light socket and wire sub-assembly.



    E112361E01
  1. Disengage the claw, and remove the 2 clamps and rear combination light socket and wire sub-assembly.