Home › BODY ELECTRICAL › LIGHTING › HIGH MOUNTED STOP LIGHT ASSEMBLY

HIGH MOUNTED STOP LIGHT ASSEMBLY > REMOVAL

for Preparation Click here



1. REMOVE BACK DOOR TRIM BOARD ASSEMBLY UPPER


    B101147E01
  1. Disengage the 6 clips and remove the back door trim board assembly upper.

  1. Remove the remaining clips on the body, and reinstall them to the back door trim board assembly upper.



2. REMOVE HIGH MOUNTED STOP LIGHT ASSEMBLY


    E103126E01
  1. Disconnect the connector.

  1. Disengage the 4 claws and remove the high mounted stop light assembly.