Home › BODY ELECTRICAL › WIPER AND WASHER › FRONT WIPER MOTOR

FRONT WIPER MOTOR > INSPECTION

for Preparation Click here



1. INSPECT FRONT WIPER MOTOR (LHD)


    B113737E01
  1. Apply battery voltage to the front wiper motor connector.

  1. Check operation of the front wiper motor.

    OK:
    Measurement condition
    Specified condition
    Battery positive (+) → Terminal 1 (+1)
    Battery negative (-) → Terminal 5 (E)
    Motor operates at low speed
    Battery positive (+) → Terminal 4 (+2)
    Battery negative (-) → Terminal 5 (E)
    Motor operates at high speed

    If the result is not as specified, replace the front wiper motor.



2. INSPECT FRONT WIPER MOTOR (RHD)


    B113737E02
  1. Apply battery voltage to the wiper motor connector.

  1. Check operation of the front wiper motor.

    OK:
    Measurement condition
    Specified condition
    Battery positive (+) → Terminal 5 (+1)
    Battery negative (-) → Terminal 4 (E)
    Motor operates at low speed
    Battery positive (+) → Terminal 3 (+2)
    Battery negative (-) → Terminal 4 (E)
    Motor operates at high speed

    If the result is not as specified, replace the front wiper motor.