Home › BODY ELECTRICAL › WIPER AND WASHER › FRONT WIPER RUBBER

FRONT WIPER RUBBER > INSTALLATION

for Preparation Click here



1. INSTALL FRONT WIPER RUBBER


    E059361E02
  1. Install the 2 wiper rubber backing plates to the front wiper rubber.

    NOTICE:
    Be sure to install the wiper rubber backing plates in the correct direction.



    E057398
  1. Install the wiper rubber so that the head part (wide side) of the wiper rubber faces the wiper pivot axle side.

    NOTICE:
    Push the front wiper blade into the grooves of the front wiper rubber to engage them completely.



2. INSTALL FRONT WIPER BLADE