Home › BODY ELECTRICAL › WIPER AND WASHER › REAR WIPER MOTOR

REAR WIPER MOTOR > INSPECTION

for Preparation Click here



1. INSPECT REAR WIPER MOTOR


    B113739E01
  1. Apply battery voltage to the rear wiper motor connector.

  1. Check operation of the rear wiper motor.

    OK:
    Measurement connection
    Specified condition
    Battery positive (+) → Terminal 1
    Battery negative (-) → Terminal 3
    Battery negative (-) → Motor Body
    Wiper motor operates

    If the result is not as specified, replace the rear wiper motor.