Home › BODY ELECTRICAL › WIPER AND WASHER › REAR WIPER RUBBER

REAR WIPER RUBBER > INSTALLATION

for Preparation Click here



1. INSTALL REAR WIPER RUBBER


    E059361E01
  1. Install the 2 rear wiper rubber backing plates to the rear wiper rubber.

    NOTICE:
    Be sure to install the rear wiper rubber backing plates in the correct direction.



    E057398
  1. Install the rear wiper rubber so that the head part (wide side) of the rear wiper rubber faces the wiper pivot axle side.

    NOTICE:
    Push the rear wiper blade into the grooves of the rear wiper rubber to engage them completely.



2. INSTALL REAR WIPER BLADE