Home › BODY ELECTRICAL › WIPER AND WASHER › REAR WIPER RUBBER

REAR WIPER RUBBER > REMOVAL

for Preparation Click here



1. REMOVE REAR WIPER BLADE
  1. Remove the rear wiper blade from the rear wiper arm.

    NOTICE:
    Do not bend the rear wiper arm with the rear wiper blade removed, as the arm tip could damage the windshield surface.



2. REMOVE REAR WIPER RUBBER
  1. Remove the rear wiper rubber from the rear wiper blade.

  1. Remove the 2 rear wiper rubber backing plates from the rear wiper rubber.