Home › BODY ELECTRICAL › WIPER AND WASHER › WASHER NOZZLE

WASHER NOZZLE > ADJUSTMENT

for Preparation Click here



1. ADJUST WASHER NOZZLE
  1. Using a Toyota 4 Way Nozzle Adjustment Tool, insert the convex portion of the adjustment tool into the concave portion of the nozzle jet and make the adjustment.

    NOTICE:
    1. Check which type of washer nozzle is being adjusted because two types (φ4 mm and φ5 mm) exist.

    2. Do not use a metal pin or other such tool because it may damage the nozzle jet.


      E112362E01

    HINT:
    The adjustment tool is made by DENSO and the part number is 95060-10010.