Home › BODY › SEAT › FRONT SEAT ASSEMBLY (for Low-back Seat Type)

FRONT SEAT ASSEMBLY (for Low-back Seat Type) > REMOVAL

for Preparation Click here



1. REMOVE FRONT SEAT ASSEMBLY


    B107542
  1. Move the front seat assembly fully forward.

  1. Remove the 2 bolts on the rear side of the seat.

  1. Move the front seat assembly to the rearmost position.

  1. Remove the 2 bolts on the front side of the seat.

  1. Move the front seat assembly to the center of the seat slide rail. Set the seatback in the upright position.

  1. Disconnect the front seat inner belt assembly connector.

  1. Remove the front seat assembly.