Home › BODY › SEAT › FRONT SEAT ASSEMBLY (for Low-back Seat Type)

FRONT SEAT ASSEMBLY (for Low-back Seat Type) > DISASSEMBLY

for Preparation Click here



1. REMOVE RECLINING ADJUSTER RELEASE HANDLE


    B107529
  1. Using a screwdriver, disengage the claw and remove the reclining adjuster release handle.

    HINT:
    Tape the screwdriver tip before use.



2. REMOVE FRONT SEAT CUSHION SHIELD INNER NO.1 LH


    B107530
  1. Disengage the 2 claws and remove the 2 screws and front seat cushion shield inner No.1 LH.



3. REMOVE FRONT SEAT CUSHION SHIELD INNER LH


    B107531
  1. Disengage the front seat inner belt assembly wire.



    B107532
  1. Disengage the 2 claws and remove the 2 screws and front seat cushion shield inner LH.



4. REMOVE FRONT SEAT INNER BELT ASSEMBLY


    B107656
  1. for Driver side:

    1. Disengage the 3 clamps.



    B107657
  1. for Passenger side:

    1. Disconnect the connector.

    2. Disengage the 5 clamps.



    B107658
  1. Remove the bolt and front seat inner belt assembly.



5. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD


    B107533E01
  1. Remove the 2 clips and 2 hog rings.



    B107534
  1. Disengage the hook and remove the separate type front seat cushion cover with pad.



6. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER


    B107543E01
  1. Remove the 9 hog rings and separate type front seat cushion cover.



7. REMOVE SEPARATE TYPE FRONT SEAT CUSHION PAD


8. REMOVE FRONT SEAT HEADREST ASSEMBLY


9. REMOVE FRONT SEAT HEADREST SUPPORT


    B107536E01
  1. Disengage the hooks and remove the 3 hog rings.



    B107544
  1. Disengage the 2 claws and remove the front seat headrest support.



10. REMOVE FRONT SEAT HEADREST SUPPORT

HINT:
Use the same procedures for the RH side and LH side.



11. REMOVE SEPARATE TYPE FRONT SEATBACK COVER WITH PAD


12. REMOVE SEPARATE TYPE FRONT SEATBACK COVER


    B107545E01
  1. Remove the 3 hog rings and separate type front seatback cover.



13. REMOVE SEPARATE TYPE FRONT SEATBACK PAD


14. REMOVE RECLINING ADJUSTER INSIDE COVER LH


    B107538
  1. Disengage the 2 claws and remove the screw and reclining adjuster inside cover LH.



15. REMOVE RECLINING ADJUSTER INSIDE COVER RH

HINT:
Use the same procedures for the RH side and LH side.



16. REMOVE RECLINING ADJUSTER INSIDE COVER LH


    B107539
  1. Disengage the claw and remove the screw and reclining adjuster inside cover LH.



17. REMOVE RECLINING ADJUSTER INSIDE COVER RH

HINT:
Use the same procedures for the RH side and LH side.



18. REMOVE FRONT SEAT WITH ADJUSTER FRAME ASSEMBLY