FRONT SEAT ASSEMBLY (for Split Bench Seat Type) > REMOVAL |
| 1. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD |
![]() |
w/o Seat belt warning occupant detection sensor:
Remove the 2 bolts and separate type front seat cushion cover with pad.
![]() |
w/ Seat belt warning occupant detection sensor:
Remove the 2 bolts.
Disconnect the connector and remove the separate type front seat cushion cover with pad.
| 2. REMOVE FRONT SEATBACK ASSEMBLY |
![]() |
Remove the 4 bolts and front seatback assembly.
| 3. REMOVE FRONT SEATBACK CENTER ASSEMBLY |
![]() |
Remove the 4 bolts and front seatback center assembly.