FRONT SEAT ASSEMBLY (for Split Bench Seat Type) > DISASSEMBLY |
| 1. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER |
![]() |
Remove the 23 hog rings.
![]() |
Remove the 9 hog rings and separate type front seat cushion cover.
| 2. REMOVE SEPARATE TYPE FRONT SEAT CUSHION PAD |
| 3. REMOVE SEPARATE TYPE FRONT SEATBACK COVER |
![]() |
Remove the 3 hog rings.
![]() |
Remove the 5 hog rings and separate type front seatback cover.
| 4. REMOVE SEPARATE TYPE FRONT SEATBACK PAD |
| 5. REMOVE RECLINING ADJUSTER RELEASE HANDLE |
![]() |
Using a screwdriver, disengage the claw and remove the reclining adjuster release handle.
| 6. REMOVE FRONT SEAT CUSHION SHIELD INNER NO.1 |
![]() |
Disengage the 8 claws and remove the screw and front seat cushion shield inner No.1.
| 7. REMOVE FRONT SEAT CUSHION SHIELD INNER |
![]() |
Disengage the 5 claws and remove the screw and front seat cushion shield inner.
| 8. REMOVE RECLINING ADJUSTER INSIDE COVER LH |
![]() |
Remove the 2 screws and reclining adjuster inside cover LH.
| 9. REMOVE RECLINING ADJUSTER INSIDE COVER RH |
| 10. REMOVE SEAT FRONT SEAT LEG COVER |
| 11. REMOVE FRONT SEATBACK FRAME SUB-ASSEMBLY |
| 12. REMOVE FRONT SEATBACK CONTROL PANEL HOLE COVER |
![]() |
Using a screwdriver, disengage the 4 claws and remove the 2 front seatback control panel hole covers.
| 13. REMOVE FRONT SEAT SIDE TABLE |
![]() |
Remove the 4 bolts.
![]() |
Push the 2 center hinge spacers in the direction indicated by the arrow in the illustration and remove the front seat side table.
| 14. REMOVE REAR SEAT CENTER ARMREST SUPPORT |
![]() |
Remove the 2 center hinge spacers.
Remove the 2 screws and 2 rear seat center armrest supports.
| 15. REMOVE CONSOLE BOX ASSEMBLY |
![]() |
Using a screwdriver, remove the 2 caps.
![]() |
Disengage the 2 claws and remove the 2 screws and console box assembly.
| 16. REMOVE RECLINING ADJUSTER RELEASE HANDLE |
![]() |
Remove the screw and reclining adjuster release handle.
| 17. REMOVE CENTER SEAT HINGE COVER LH |
![]() |
Disengage the 5 claws and remove the 2 screws and center seat hinge cover LH.
| 18. REMOVE CENTER SEAT HINGE COVER RH |
![]() |
Disengage the claw and remove the screw and center seat hinge cover RH.
| 19. REMOVE CENTER SEAT HINGE COVER UPPER |
| 20. REMOVE FRONT SEAT CUSHION COVER SET PLATE |
![]() |
Remove the bolt, bush and front seat cushion cover set plate.
| 21. REMOVE RECLINING SEATBACK ADJUSTER ASSEMBLY |
![]() |
Remove the 8 hog rings and front seatback cover center.
![]() |
Using a "torx" socket T50, remove the 2 "torx" bolts and reclining seatback adjuster assembly.
| 22. REMOVE FRONT SEATBACK COVER CENTER |
| 23. REMOVE CENTER SEATBACK PAD |