Home › BODY ELECTRICAL › METER › COMBINATION METER

COMBINATION METER > INSTALLATION

for Preparation Click here



1. INSTALL COMBINATION METER ASSEMBLY


    B106891
  1. Connect the connector and engage the 2 claws.



    B102823
  1. Install the combination meter assembly with the 2 screws.



2. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY
  1. Engage the 6 claws and install the instrument cluster finish panel sub-assembly.



3. INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY


4. INSTALL INSTRUMENT CLUSTER FINISH PANEL NO.1 GARNISH


5. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY CENTER


6. INSTALL INSTRUMENT CLUSTER FINISH PANEL NO.2 GARNISH