TRANSMITTER BATTERY > REPLACEMENT |
| 1. REMOVE TRANSMITTER BATTERY |
![]() |
Use a screwdriver with the tip taped to pry open the cover.
![]() |
Remove the cover.
![]() |
Remove the module from the key.
![]() |
Use a coin, or other flat object, to pry open the module cover.
![]() |
Remove the battery.
| 2. INSTALL TRANSMITTER BATTERY |
![]() |
Install a new battery with the positive side up as shown the illustration.
Install the module cover.
![]() |
Install the module.
![]() |
Install the cover.
| 3. INSPECT TRANSMITTER SUB-ASSEMBLY MODULE SET DOOR CONTROL |
Check that the LED on the key comes on when each switch is pressed.