Home › BODY › SEAT › FRONT SEAT ASSEMBLY (for Center Seat)

FRONT SEAT ASSEMBLY (for Center Seat) > REASSEMBLY

for Preparation Click here



1. INSTALL CENTER SEATBACK FRAME SUB-ASSEMBLY


2. INSTALL CENTER SEATBACK PAD


3. INSTALL FRONT SEATBACK COVER CENTER


    B108013E01
  1. Using hog ring pliers, install the front seatback cover center to the center seatback pad with 3 new hog rings.

    NOTICE:
    1. Be careful not to damage the cover.
    2. When installing the hog rings, take care to minimize wrinkles as much as possible.



4. INSTALL FRONT SEAT HEADREST SUPPORT


5. INSTALL FRONT SEAT HEADREST SUPPORT


6. INSTALL FRONT SEAT HEADREST ASSEMBLY


7. INSTALL CENTER SEAT HINGE COVER UPPER RH


8. INSTALL CENTER SEAT HINGE COVER UPPER LH


9. INSTALL CENTER SEAT CUSHION PAD


10. INSTALL CENTER SEAT CUSHION COVER SUB-ASSEMBLY


    B108014E01
  1. Using hog ring pliers, install the center seat cushion cover sub-assembly to the center seat cushion pad with 12 new hog rings.

    NOTICE:
    1. Be careful not to damage the cover.
    2. When installing the hog rings, take care to minimize wrinkles as much as possible.



11. INSTALL CENTER SEAT CUSHION COVER SUB-ASSEMBLY WITH PAD


    B105584
  1. Install the center seat cushion cover sub-assembly with pad with the 4 bolts.

    Torque:
    41 N*m{ 418 kgf*cm , 30 ft.*lbf }



12. INSTALL CENTER SEAT HINGE COVER RH


13. INSTALL CENTER SEAT HINGE COVER LH


14. INSTALL RECLINING ADJUSTER RELEASE HANDLE