Home › COMMUNICATION SYSTEM › CAN COMMUNICATION › CAN COMMUNICATION SYSTEM

CAN COMMUNICATION SYSTEM > TERMINALS OF ECU

for Preparation Click here


HINT:
This section describes the standard CAN values for all CAN related components.


CAN J/C


  1. CAN J/C connectors.

    HINT:
    1. The connectors connected to the CAN J/C can be distinguished by the colors of the bus lines and the connecting side of the connector.
    2. H3, H4 and H5 are interchangeable.


    C111165E01


    CAN J/C connectors ("A" side, w/ earth terminal)
    Color (CAN-H Side)
    Color (CAN-L Side)
    Air conditioning amplifier (H3)
    L
    W
    ECM (H4)
    B
    W
    DLC3 (H5)
    R
    W



  2. G026205E04
  3. The terminals of the CAN J/C connectors.
    Terminal
    Terminal symbol
    1
    CANH
    2
    CANL



  4. G026214E04
  5. Measure the resistance according to the value(s) in the table below.

    Standard resistance:
    Terminals
    Specified value
    CANH - CANL
    108 to 132 Ω


DLC3


    G026206E18
  1. Check the DLC3.

    1. Measure the resistance according to the value(s) in the table below.

      Standard resistance:

      Terminals
      Terminal Description
      Condition
      Specified Value
      H23-6 (CANH) - H23-14 (CANL)
      HIGH-level CAN bus line - LOW-level CAN bus line
      IG switch OFF
      54 to 69 Ω
      H23-6 (CANH) - H23-16 (BAT)
      HIGH-level CAN bus line - Battery positive
      IG switch OFF
      1 MΩ or higher
      H23-14 (CANL) - H23-16 (BAT)
      LOW-level CAN bus line - Battery positive
      IG switch OFF
      1 MΩ or higher
      H23-6 (CANH) - H23-4 (CG)
      HIGH-level CAN bus line - Ground
      IG switch OFF
      3 kΩ or higher
      H23-14 (CANL) - H23-4 (CG)
      LOW-level CAN bus line - Ground
      IG switch OFF
      3 kΩ or higher


ECM (2TR-FE, 2KD-FTV)


  1. Measure the resistance according to the value(s) in the table below.


    C101955E01


    Standard resistance:
    2TR-FE:

    Terminal
    Condition
    Specified Value
    B7-33 (CANH) - B7-34 (CANL)
    IG switch OFF
    108 to 132 Ω
    2KD-FTV:

    Terminal
    Condition
    Specified Value
    B7-24 (CANH) - B7-23 (CANL)
    IG switch OFF
    108 to 132 Ω
    B7-22 (CAN+) - B7-21 (CAN-)
    IG switch OFF
    108 to 132 Ω



  2. C107875E01
  3. Measure the resistance according to the value(s) in the table below.

    Standard resistance:
    2TR-FE:

    Terminals
    Wiring Color
    Terminal Description
    Condition
    Specified Value
    B7-33 (CANH) - B7-34 (CANL)
    B - W
    HIGH-level CAN bus line - LOW-level CAN bus line
    IG switch OFF
    108 to 132 Ω
    B7-33 (CANH) - D1-3 (E1)
    B - BR
    HIGH-level CAN bus line - Ground
    IG switch OFF
    3 kΩ or more
    B7-34 (CANL) - D1-3 (E1)
    W - BR
    LOW-level CAN bus line - Ground
    IG switch OFF
    3 kΩ or more
    B7-33 (CANH) - B9-3 (BATT)
    B - B-R
    HIGH-level CAN bus line - Battery positive
    IG switch OFF
    1 MΩ or more
    B7-34 (CANL) - B9-3 (BATT)
    W - B-R
    LOW-level CAN bus line - Battery positive
    IG switch OFF
    1 MΩ or more
    2KD-FTV:

    Terminals
    Wiring Color
    Terminal Description
    Condition
    Specified Value
    B7-24 (CANH) - B7-23 (CANL)
    B - W
    HIGH-level CAN bus line - LOW-level CAN bus line
    IG switch OFF
    108 to 132 Ω
    B7-24 (CANH) - D3-7 (E1)
    B - BR
    HIGH-level CAN bus line - Ground
    IG switch OFF
    3 kΩ or more
    B7-23 (CANL) - D3-7 (E1)
    W - BR
    LOW-level CAN bus line - Ground
    IG switch OFF
    3 kΩ or more
    B7-24 (CANH) - B7-2 (BATT)
    B - B-R
    HIGH-level CAN bus line - Battery positive
    IG switch OFF
    1 MΩ or more
    B7-23 (CANL) - B7-2 (BATT)
    W - B-R
    LOW-level CAN bus line - Battery positive
    IG switch OFF
    1 MΩ or more
    B7-22 (CAN+) - B7-21 (CAN-)
    L - W
    HIGH-level CAN bus line - LOW-level CAN bus line
    IG switch OFF
    108 to 132 Ω
    B7-22 (CAN+) - D3-7 (E1)
    L - BR
    HIGH-level CAN bus line - Ground
    IG switch OFF
    3 kΩ or more
    B7-21 (CAN-) - D3-7 (E1)
    W - BR
    LOW-level CAN bus line - Ground
    IG switch OFF
    3 kΩ or more
    B7-22 (CAN+) - B7-2 (BATT)
    L - B-R
    HIGH-level CAN bus line - Battery positive
    IG switch OFF
    1 MΩ or more
    B7-21 (CAN-) - B7-2 (BATT)
    W - B-R
    LOW-level CAN bus line - Battery positive
    IG switch OFF
    1 MΩ or more


AIR CONDITIONING AMPLIFIER


    C107863E01
  1. Check the harness side connector (H18) of the air conditioning amplifier.

    1. Disconnect the connector (H18) from the air conditioning amplifier.

    2. Measure the resistance according to the value(s) in the table below.

      Standard resistance:

      Terminals
      Wiring Color
      Terminal Description
      Condition
      Specified Value
      H18-10 (CANH) - H18-11(CANL)
      L - W
      HIGH-level CAN bus line - LOW-level CAN bus line
      IG switch OFF
      54 to 69 Ω
      H18-10 (CANH) - H18-29 (GND)
      L - W-B
      HIGH-level CAN bus line - Ground
      IG switch OFF
      3 kΩ or higher
      H18-11 (CANL) - H18-29 (GND)
      W - W-B
      LOW-level CAN bus line - Ground
      IG switch OFF
      3 kΩ or higher
      H18-10 (CANH) - H18-40 (B)
      L - W-R
      HIGH-level CAN bus line - Battery positive
      IG switch OFF
      1 MΩ or higher
      H18-11 (CANL) - H18-40 (B)
      W - W-R
      LOW-level CAN bus line - Battery positive
      IG switch OFF
      1 MΩ or higher


TRANSMISSION CONTROL ECU (*2)

HINT:
*2: Applicable only to automatic transmission vehicles with 2KD-FTV engine.



  1. Measure the resistance according to the value(s) in the table below.


    C102705E01


    Standard resistance:

    Terminal
    Condition
    Specified Value
    O3-21 (CAN+) - O3-20 (CAN-)
    IG switch OFF
    108 to 132 Ω



  2. C116594E01
  3. Measure the resistance according to the value(s) in the table below.

    Standard resistance:

    Terminals
    Wiring Color
    Terminal Description
    Condition
    Specified Value
    O3-21 (CAN+) - O3-20(CAN-)
    L - W
    HIGH-level CAN bus line - LOW-level CAN bus line
    IG switch OFF
    108 to 132 Ω
    O3-21 (CAN+) - O1-1(E1)
    L - BR
    HIGH-level CAN bus line - Ground
    IG switch OFF
    3 kΩ or higher
    O3-20 (CAN-) - O1-1(E1)
    W - BR
    LOW-level CAN bus line - Ground
    IG switch OFF
    3 kΩ or higher
    O3-21 (CAN+) - O3-5(+B)
    L - B-R
    HIGH-level CAN bus line - Battery positive
    IG switch OFF
    1 MΩ or higher
    O3-20 (CAN-) - O3-5(+B)
    W - B-R
    LOW-level CAN bus line - Battery positive
    IG switch OFF
    1 MΩ or higher