CAN COMMUNICATION SYSTEM > DIAGNOSIS SYSTEM |
| BUS CHECK (COMMUNICATION MALFUNCTION DTC) |
![]() |
Select "Bus Check" from the "System Select" screen on the intelligent tester.
![]() |
Select "Communication Malfunction DTC" from the "Bus Check" screen, and then select "Enter".
![]() |
Select a system to be checked and select "Details".
![]() |
CAN communication system DTC(s) is/are displayed.
| BUS CHECK (COMMUNICATION BUS CHECK) |
![]() |
Select "Communication Bus Check" from the "Bus Check" screen.
![]() |
The screen displays the ECUs and sensors that are properly connected to the CAN communication system.
![]() |
"There is no system connected to the communication bus" is displayed if there are no ECUs or sensors connected to the CAN bus.
| CHECK FOR INSTALLED SYSTEMS (ECUS) THAT ADOPT CAN COMMUNICATION |
Systems (ECUs) that adopt CAN communication vary depending on the vehicle's optional settings. Check which systems (ECUs) are installed on the vehicle.
| ECU name | Check method |
| ECM | Installed on all vehicles. (CAN communication is adopted only for vehicles with the 2TR-FE or 2KD-FTV engine.) |
| Air conditioning amplifier | Installed on vehicles with air conditioners. (CAN communication is adopted only for vehicles with 2TR-FE or 2KD-FTV engine.) |
| Transmission control ECU | Installed on only automatic transmission vehicles with 2KD-FTV engine. |