Home › BODY › ENGINE HOOD / DOOR › SLIDE DOOR CLOSER RELAY

SLIDE DOOR CLOSER RELAY > INSTALLATION

for Preparation Click here



1. INSTALL SLIDE DOOR CLOSER RELAY


    B102887
  1. Install the slide door closer relay with the bolt.



2. INSTALL SLIDE DOOR SERVICE HOLE NO.1 COVER


    B111436E01
  1. Install the slide door service hole No.1 cover.

  1. Connect the cable.

  1. Engage the clamp.



3. INSTALL REAR DOOR TRIM BOARD SUB-ASSEMBLY


    B106881E01
  1. Engage the 19 clips and claw and install the rear door trim board sub-assembly.



    B101169
  1. Using a "torx" socket wrench, install the 2 "torx" screws.



4. INSTALL SLIDE DOOR WINDOW GARNISH


    B106880E01
  1. Engage the 4 clips and install the slide door window garnish.