REAR NO. 1 SEAT ASSEMBLY (for Fixed Seat Type) > DISASSEMBLY |
| 1. REMOVE RECLINING RELEASE HANDLE SUB-ASSEMBLY |
![]() |
Using a piece of cloth, etc., remove the snap ring and reclining handle sub-assembly.
| 2. REMOVE RECLINING ADJUSTER COVER LH |
![]() |
Remove the 2 screws.
Disengage the claw and remove the reclining adjuster cover LH as shown in the illustration.
| 3. REMOVE RECLINING ADJUSTER COVER RH |
| 4. REMOVE NO.1 SEATBACK COVER SUB-ASSEMBLY |
![]() |
Operate the reclining release handle sub-assembly and fold down the seatback onto the seat cushion as shown in the illustration.
![]() |
Open the fastener of the No.1 seatback cover sub-assembly.
Remove the No.1 seatback cover sub-assembly.
| 5. REMOVE NO.1 SEATBACK PAD |
| 6. REMOVE NO.1 SEAT LEG STOPPER HOLDER |
| 7. REMOVE REAR SEAT LEG STOPPER |
| 8. REMOVE REAR SEAT BELT ASSEMBLY INNER (w/ Seat Belt) |
![]() |
Remove the bolt and rear seat belt assembly inner.
| 9. REMOVE REAR SEAT BELT ASSEMBLY OUTER (w/ Seat Belt) |
![]() |
Remove the bolt and rear seat belt assembly outer.
| 10. REMOVE REAR SEATBACK LOCK COVER (w/ Seat Belt) |
![]() |
Remove the 4 screws and 2 rear seatback lock covers.
| 11. REMOVE REAR SEAT LOCK HANDLE KNOB (w/ Seat Belt) |
| 12. REMOVE REAR NO.1 SEAT LOCK ASSEMBLY (w/ Seat Belt) |
![]() |
Remove the 2 bolts and 2 rear No.1 seat lock assemblies.
| 13. REMOVE NO.1 SEAT LEG SUB-ASSEMBLY REAR |
![]() |
Remove the 2 springs.
![]() |
Remove the 2 E-rings, 2 pins and No.1 seat leg sub-assembly rear.
| 14. REMOVE NO.1 SEAT CUSHION COVER SUB-ASSEMBLY |
![]() |
Separate the 2 magic fasteners.
![]() |
Open the fastener of the No.1 seat cushion cover sub-assembly and remove the No.1 seat cushion cover sub-assembly.
| 15. REMOVE NO.1 SEAT CUSHION PAD |
| 16. REMOVE NO.1 SEAT CUSHION SPRING ASSEMBLY |