Home › SUSPENSION & AXLE › SUSPENSION › FRONT STRUT BAR

FRONT STRUT BAR > REMOVAL

for Preparation Click here



1. REMOVE FRONT WHEEL


2. REMOVE FRONT STRUT BAR


    C112994E02
  1. Measure dimension A (to be used as a reference dimension in later steps) of the thread of the strut bar and note down the length.



    C106504E01
  1. Using SST, remove the lock nut of the strut bar (rear side), washer strut bar retainer, strut bar cushion and tube.

    SST
    09326-22011  



    C102011E01
  1. Remove the 2 bolts and 2 nuts and separate the strut bar from the front suspension lower arm.

  1. Remove the adjust nut from the strut bar.