Home › ENGINE ยท 2TR-FE › EMISSION CONTROL › AIR PUMP

AIR PUMP > INSTALLATION

for Preparation Click here



1. INSTALL AIR PUMP BRACKET


    A114746
  1. Install the pump to the bracket w/ air pump insulators.

  1. Install the wire harness connector with the clamp.



2. INSTALL AIR HOSE NO.5
  1. Install the air hose No.5 with the clip.



3. INSTALL AIR PUMP INLET


    A113522E01
  1. Install the air pump inlet with the clip.



4. INSTALL AIR PUMP ASSEMBLY W/ BRACKET


    A113519E01
  1. Install the pump w/ bracket to the body panel with the 3 bolts.

    Torque:
    13 N*m{ 133 kgf*cm , 10 ft.*lbf }



5. CONNECT AIR HOSE NO.5


    A113518E01
  1. Connect the air hose No.5 to the air pump inlet pipe with the clip.



6. INSTALL BATTERY SERVICE HOLE COVER


7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL


8. PERFORM INITIALIZATION
(Click here)