Home › ENGINE ยท 2TR-FE › EMISSION CONTROL › AIR PUMP

AIR PUMP > REMOVAL

for Preparation Click here



1. REMOVE BATTERY SERVICE HOLE COVER
  1. Roll up the carpet.

  1. Remove the battery service hole cover.



2. SEPARATE AIR HOSE NO.5


    A113518E01
  1. Loosen the clip, and separate air hose No.5.



3. REMOVE AIR PUMP ASSEMBLY W/ BRACKET


    A113519E01
  1. Remove the 3 bolts and the air pump connector.

  1. Remove the air pump assembly w/ bracket.



4. REMOVE AIR PUMP INLET


    A113522E01
  1. Loosen the clip, and remove the air pump inlet.



5. REMOVE AIR HOSE NO.5
  1. Loosen the clip, and remove the air hose No.5.



6. REMOVE AIR PUMP BRACKET
  1. Disconnect the wire harness connector from the air pump bracket.



    A114746
  1. Remove the air pump from the bracket w/ air pump insulators.