Home › ENGINE ยท 2TR-FE › EMISSION CONTROL › VENTILATION VALVE

VENTILATION VALVE > REMOVAL

for Preparation Click here



1. REMOVE FRONT SEAT ASSEMBLY RH (for Hi-back Seat Type)

HINT:
Use the same procedures described for the LH side.



2. REMOVE FRONT SEAT ASSEMBLY RH (for Low-back Seat Type)

HINT:
Use the same procedures described for the LH side.



3. REMOVE FRONT DOOR SCUFF PLATE RH


4. REMOVE ENGINE SERVICE HOLE SUB COVER SUB-ASSEMBLY
  1. Roll up the carpet, and remove the 5 bolts and engine service hole sub cover.



5. REMOVE VENTILATION VALVE SUB-ASSEMBLY


    A113530
  1. Loosen the hose clamp and disconnect the ventilation hose from the ventilation valve.

  1. Remove the ventilation valve.