BLOWER UNIT > DISASSEMBLY |
| 1. REMOVE AIR INLET CONTROL CABLE |
![]() |
Release the 3 claws and remove the air inlet control cable.
| 2. REMOVE AIR DUCT SUB-ASSEMBLY |
![]() |
Release the 2 claws and remove the air duct sub-assembly.
| 3. REMOVE HEATER DOOR |
![]() |
Release the 2 claws and remove the heater door.
| 4. REMOVE BLOWER RESISTOR |
![]() |
Remove the 2 screws and blower resistor.
| 5. REMOVE BLOWER W/ FAN MOTOR SUB-ASSEMBLY |
![]() |
Remove the 3 screws and blower w/ fan motor sub-assembly.