Home › HEATER & AIR CONDITIONING SYSTEM › AIR CONDITIONING › BLOWER UNIT

BLOWER UNIT > REASSEMBLY

for Preparation Click here



1. INSTALL BLOWER W/ FAN MOTOR SUB-ASSEMBLY


    E108780
  1. Install the blower w/ fan motor sub-assembly with the 3 screws.



2. INSTALL BLOWER RESISTOR


    E108779
  1. Install the blower resistor with the 2 screws.



3. INSTALL HEATER DOOR


    E111315E01
  1. Engage the 2 claws to install the heater door.



4. INSTALL AIR DUCT SUB-ASSEMBLY


    E108781E02
  1. Engage the 2 claws to install the air duct sub-assembly.



5. INSTALL AIR INLET CONTROL CABLE


    E108778E02
  1. Engage the 3 claws to install the air inlet control cable.