Home › HEATER & AIR CONDITIONING SYSTEM › AIR CONDITIONING › CONDENSER

CONDENSER > ON-VEHICLE INSPECTION

for Preparation Click here



1. INSPECT W/ RECEIVER CONDENSER ASSEMBLY
  1. If the fins of the w/reciver condenser assembly are dirty, clean them with water and dry them with compressed air.

    NOTICE:
    Do not damage the fins of the condenser assembly.



2. CHECK CONDENSER FOR LEAKAGE OF REFRIGERANT
  1. Check the pipe joints for gas leakage using a halogen leak detector.

  1. Check the tightening torque of the joints if a gas leakage is detected in any of the pipe joints.