Home › HEATER & AIR CONDITIONING SYSTEM › AIR CONDITIONING › REAR COOLING UNIT

REAR COOLING UNIT > DISASSEMBLY

for Preparation Click here



1. REMOVE COOLER WIRING HARNESS SUB-ASSEMBLY


    E108965E02
  1. Remove the 4 clamps and 4 connectors, and cooler wiring harness sub-assembly.



2. REMOVE REAR COOLER BLOWER RESISTOR


    E104215
  1. Remove the 2 screws and rear cooler blower resistor.



3. REMOVE COOLING UNIT CASE SUB-ASSEMBLY


    E104216
  1. Remove the 18 screws and cooling unit case sub-assembly.



4. REMOVE COOLER NO.2 THERMISTOR


    E104217
  1. Remove the cooler No.2 thermistor.



5. REMOVE EVAPORATOR SUB-ASSEMBLY (REAR)


    E104218
  1. Remove the screw and clamp.

  1. Remove the evaporator sub-assembly (rear).



6. REMOVE BLOWER (REAR) FAN SUB-ASSEMBLY


    E104219
  1. Remove the 2 nuts and 2 blower (rear) fan sub-assemblys.



7. REMOVE BLOWER MOTOR ASSEMBLY


    E104220
  1. Remove the plate 2 washers.

  1. Remove the 2 screws and 2 blower motor assembly.