Home › HEATER & AIR CONDITIONING SYSTEM › AIR CONDITIONING › REAR HEATER ASSEMBLY

REAR HEATER ASSEMBLY > DISASSEMBLY

for Preparation Click here



1. REMOVE HEATER COVER


    E110422
  1. Remove the 3 screws and heater cover.



2. REMOVE REAR HEATER BLOWER RESISTOR


    E104234
  1. Disconnect the connector.

  1. Remove the 2 screws and rear heater blower resistor.



3. REMOVE HEATER UNIT REAR HEATER WATER INLET HOSE


    E110423
  1. Using pliers, grip the claw of the clip and slide the clip to disconnect the heater unit rear heater water inlet hose.



4. REMOVE HEATER UNIT REAR HEATER WATER OUTLET HOSE

HINT:
Disconnection of the heater unit rear heater water outlet hose is the same way as the heater unit rear heater water inlet hose.



5. REMOVE HEATER COVER (PIPE COVER)


    E110424
  1. LHD:

    1. Remove the 3 screws and heater cover.



    E104236
  1. RHD:

    1. Remove the 4 screws and heater cover.



6. REMOVE REAR HEATER UNIT SUB-ASSEMBLY


    E110430E02
  1. Remove the rear heater unit sub-assembly.



7. REMOVE HEATER COVER (MOTOR COVER)


    E110426
  1. Remove the 3 screws and heater cover.



8. REMOVE REAR HEATER BLOWER MOTOR SUB-ASSEMBLY


    E104239
  1. Disconnect the connector.



    E104240
  1. Remove the 3 screws and rear heater blower motor sub-assembly.



9. REMOVE AIR DUCT REAR NO.1


    E104241
  1. Remove the 3 screws and the air duct rear No.1.