Home › BODY › EXTERIOR › FRONT BUMPER

FRONT BUMPER > DISASSEMBLY

for Preparation Click here



1. REMOVE RADIATOR GRILLE LOWER LH (w/o Fog Light)


    B101614
  1. Remove the 2 bolts and clip.

  1. Remove the radiator grille lower LH.



2. REMOVE RADIATOR GRILLE LOWER RH (w/o Fog Light)


3. REMOVE FOG LIGHT COVER LH (w/o Fog Light)


    E111371
  1. Disengage the 3 claws and remove the fog light cover.



4. REMOVE FOG LIGHT COVER RH (w/ Fog Light)


5. REMOVE FOG LIGHT ASSEMBLY LH (w/ Fog Light)


    E111372E01
  1. Disconnect the connector and remove the clamp.

  1. Remove the 2 bolts, clip and fog light assembly with bracket.



6. REMOVE FOG LIGHT ASSEMBLY RH (w/ Fog Light)


7. REMOVE ULTRASONIC SENSOR RETAINER NO.1 (w/ Clearance Sonar)
  1. Disconnect the connector.



    E075062
  1. Remove the ultrasonic sensor retainer No.1 as shown in the illustration.



8. REMOVE ULTRASONIC SENSOR NO.1 (w/ Clearance Sonar)
  1. Remove the No.1 ultrasonic sensor.



9. REMOVE HARNESS (w/ Clearance Sonar)


10. REMOVE FRONT BUMPER SIDE SUPPORT LH


    E109047E01
  1. Remove the 2 screws.

  1. Release the 2 clamps and remove the front bumper side support.



11. REMOVE FRONT BUMPER SIDE SUPPORT RH


12. REMOVE FRONT FLOOR CROSS MEMBER REINFORCEMENT SUB-ASSEMBLY


    B103051
  1. Remove the 5bolt and front floor cross member reinforcement sub-assembly.



13. REMOVE FRONT BUMPER REINFORCEMENT


    B101617
  1. Remove the 6 bolts and front bumper reinforcement.